Search

Maintaining of the proper predetermined paper pulp consistency on the different stages of the paper or cardboard manufacturing process significantly affects on quality and self cost of manufactured articles. The improvement of precision and repeatability of the paper pulp viscosity and consistency measurements is relevant to paper industry. Objective of the work is to improve the industrial-type paper pulp rotational consistometer. A new method for measurement of paper pulp concentration by means of a rotational viscometer was suggested which enables determining the flow consistency index K and flow behavior index n in the Ostwald-de Waele power law. The influence of the following torques on the measurement results is eliminated thanks to the new method: the friction torque in the seal of the sensitive element, the friction torque in the bearings of the shaft and the torque created under the influence of the flow with distorted flow speed profile. This is achieved by measuring the torque which acts on the sensitive element approaching the selected frequencies of sensitive element rotation both from the lower and higher frequencies. The mean torque value is calculated based on the obtained values. The measurements are conducted for two sensitive element rotation frequencies adjusted in advance. The frequency of sensitive element rotation is changed by means of a frequency converter. It is shown that by using two different rotation frequencies of the sensitive element of a rotational viscometer it is possible to define the flow consistency index and the flow behavior index. Paper pulp viscosity and consistency is defined on the basis of these two indexes. It is also suggested to average the results of viscous friction torque measurement approaching the rotation frequency of the viscometer sensitive element to the working frequency chosen for measurement from the lower and higher frequency ranges. By averaging the results of such measurement the friction torques in sealing and bearings supporting the sensitive element shaft are compensated. By changing the rotation direction of the sensitive element and by further averaging the obtained results it is possible to eliminate the influence of the asymmetrical distribution of paper pulp flow speed in the pipeline. This improves accuracy of the paper pulp consistency measurement.